DTA-96 Digital Temperature Stage Control Relay

Temperature controller (two-channel thermostat) with timer and heating profile - self-tuning PID controller, panel or device mount. Step-by-step temperature controller. Dimensions 96x96x90 mm.

Unlike cheap analogs, the TENSE thermostat allows you to set temperature limits and the time for the temperature to reach the set values. This greatly simplifies the programming process. In addition, the PID mode allows you to maintain the system temperature as close as possible to the set values.

Another important difference from the competition is the simultaneous display of current temperature, set temperature, control step and time. The presence of START/STOP/PAUSE/SET control buttons on the front panel is very practical - it allows quick and efficient control of your technological processes.

Main features:

• You can choose one of the operating modes: P, PI, PD, PID or just ON-OFF.

• Two relay control outputs OUT and ALARM, optionally you can set the OUT output to solid-state relays

• Programming of up to 20 temperature levels / heating stages

• Each stage is programmable up to 18 hours of operation

• Automatic selection of PID control parameters

• Wide selection of temperature sensors to connect to the thermostat - T/C (J, K, T, S, R) or Pt100

• Automatic reduction of "overshoot" in PID mode

• Integrated antiwindup function - compensation of integration saturation effect

• Choice of absolute, relative or band value for the ALARM contact

• Ability to set upper and lower levels for SET and ALARM

• The controller display shows two temperature values - 4 segment 7 characters of the set temperature value and 4 segment 7 characters of the actual temperature value that the controller is measuring, as well as time interval values and step number

• Integrated cold temperature compensation for T/C sensors (cold compensation) 0...50°C

• Linear compensation for Pt100 type temperature sensors connected to the thermostat up to 10 Ohms

• Possibility of adjusting the measuring temperature offset value for the thermostat to -100...+100°C

• Password protection of temperature controller parameters

• The temperature controller has high setting accuracy and time intervals

• Non-volatile memory (EEPROM) for storing settings

• Easy connection to the controlled device: all connections are made with quick connectors

• Optional power supply of 24 V DC or AC

• Installation height: up to 2000 m above sea level

• Temperature sensor not included

• Remember to order a circuit breaker to protect the power and control/signal contact circuits.

Measurement scales (ranges):

Sensor type - range:

• -100 .. 600 °C, type J T/C, (InPt = J)

• -100 .. 1300 °C, type K T/C, (InPt = k)

• -100 ... 400 °C, type T T/C, (InPt = t)

• 0 ... 1750 °C, type S T/C, (InPt = S)

• 0 ... 1750 °C, type R T/C, (InPt = r)

• -100 ... 600 °C, Pt100 (InPt = Pt)

• -99,9 ... 600,0 °C, Pt100 (InPt = Pt.0)